This automatic transfer switch allows on-off control of devices such as generators.
This automatic transfer switch allows on-off control of devices such as generators.
An ATS (automatic transfer switch) is used to change the power source to a secondary source, usually a generator, in case of power failure. When there is a failure of the primary power source the ATS automatically starts the generator and switches the input power to the generator. When the primary power source is restored the ATS resets the primary input.
Note: Your generator requires an ATS socket to operate this switch.
FEATURES
• Hour meter
• Electric start key switch
• Oil alert lamp
• 2 Year Warranty
SPECIFICATIONS
Voltage: 230V
Maximum power output: 5kW
Maximum current: 21A
Transfer delay time: 2-5 seconds
Return delay: 10 - 20 seconds
Connections: Generator monitor 5 pin connector
Dimensions: W 28cm x D 28cm H 22cm
Weight: 2.8kg
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
I purchased this last year now have my PV off grid system up and running the ATS coupled to a 5000 w Hyundai diesel genset works very well. Am told that in the winter months the ATS will be working most days I hope not. Time will tell.
Good value for money. Works well
This is part of an off grid PV system using a Hyundai 5000w gen set as a back up. It functions as an automatic generator start system when the PV battery State of Charge drops below 40%, and stops the gen set when SoC gets above 80%. While the unit is NOT designed with this in mind, with a minor alteration in the wiring it works very well. It is triggered by the main inverters "two wire" back up generator function