Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
The floor is rebated to prevent any moisture damage and all the timber has been treated - rough-sawn H4 bearers and rough-sawn H3.2 floorboards. The kit also contains galvanised nails.
All timber is cut to size and takes very little time to build.
FEATURES
• H4 Bearers (rough-sawn)
• H3.2 Floorboards (rough-sawn)
• Galvanised nails/nail plates
SPECIFICATIONS: GS510
Bearers: 1915mm x 75mm x 50mm (14)
Floorboards: 1318mm x 150mm x 19mm (50)
Nails: 60mm x 2.8mm (420)
Nail plates: 6T5 180mm x 34mm (14), 6T10 180mm x 68mm (7)
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
Nice and easy put together, clear instructions and good solid finished product.
Bought this as the under floor support. Saved having to go the timber yard and sort out the needed timber. Had left over timber, handy to make a couple of planter boxes for the wife.
Convenience having everything cut almost to size and nails supplied is great but it loses its strength abit as all the timber is cut down in half obviously for easier transport. Also throw the instructions out they aren't any use. Build in place don't try to move it bloody heavy. Ideal for those with limited tools and some knowledge
perfect fit.
A good system but needs an extra half board, otherwise the floor boards have gaps between
Floorboards are not the right size to fit the shed, different thicknesses of the boards and not straight. So some big gaps between them. Next time I would assemble the shed onto the wood bearers and once the shed is up install floor boards
Not quite large enough to fit the shed properly, anchors which come with shed do not fit with the floor. Also we had to cut the corners which was not in instructions. Basically shed made to go on top of floor not recessed round the edge. Floor and shed instructions contradictory.