Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
The floor is rebated to prevent any moisture damage and all the timber has been treated - rough-sawn H4 bearers and rough-sawn H3.2 floorboards. The kit also contains galvanised nails.
All timber is cut to size and takes very little time to build.
FEATURES
• H4 Bearers (rough-sawn)
• H3.2 Floorboards (rough-sawn)
• Galvanised nails/nail plates
SPECIFICATIONS:
Bearers: 1535mm x 75mm x 50mm (14)
Floorboards: 1508mm x 150mm x 19mm (40)
Nails: 60mm x 2.8mm (336)
Nail plates: 6T5 180mm x 34mm (14), 6T10 180mm x 68mm (7)
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
Not a good fit gap all the way around plenty of room for the wind to blow in
Horrible to get it squared up. Should keep it as 3m Lenths as the brackets is not much of help keeping the floor together.
Perfect for our new shed
Just take your time and its comes together nicely.
Everything is there in the kit! Easy to assemble, only thing you need is a hammer to knock the nails in (which are provided in the kit) and a tape measure to make sure the base is square. Easy!!!
Shed looks solid and very presentable. Instructions could be more detailed and recommended platform should be larger.
Floor was wrong size for shed. Most of the floor boards had major knots in them a small amount of weight caused them to break and they didnt have right amount for the floor without gaps between boards. The main frame was to narrow for the shed and alot of the beams weren't square (cut from the edge of the log). Much better to buy good wood lengths for main frame and plywood floor
I made my own base out of 150x50 bearers to give me a good solid floor, making sure all was level and square made erecting the shed fairly easy. I am very pleased with my shed. I have passed onto friends details of where to purchase.
For the 3x3m shed this Floor kit is not ideal. The boards are very cheap quality and ours were not straight a all. When we laid them our we had a 4cm difference or gap at the end. In the end we ran all the boards through the thicknesser to make them a bit smoother and took 9 pallets as a base and nailed those boards on top. This was a much more stable solution. So I would not recommend this solution. Take Pallets as a base and get some nicer boards on top as a good and steady base for a shed. Especially if it is a big one.
Easy to assemble and very happy