Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
Get this great custom made wooden floor kit, guaranteed to fit perfectly in your new Trade Tested shed. Manufactured locally and made from FSC Certified New Zealand Pine, this great kit comes with everything you’ll need to create the perfect foundation and floor for your awesome new shed.
The floor is rebated to prevent any moisture damage and all the timber has been treated - rough-sawn H4 bearers and rough-sawn H3.2 floorboards. The kit also contains galvanised nails.
All timber is cut to size and takes very little time to build.
FEATURES
• H4 Bearers (rough-sawn)
• H3.2 Floorboards (rough-sawn)
• Galvanised nails/nail plates
SPECIFICATIONS:
Bearers: 1535mm x 75mm x 50mm (8)
Floorboards: 1495mm x 150mm x 19mm (20)
Nails: 60mm x 2.8mm (170)
Nail plates: 6T5 180mm x 34mm (8), 6T10 180mm x 68mm (4)
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
awesome flooring happy hubby happy wife
Good timber. However following the instructions left gaps at both ends when shed placed.. Don't!!!! nail the outside nail on each corner as the corner braces/brackets have to go under the floor and then each corner board nailed through the brace.
Wouldn’t recommend. Wood was cut to short for what was needed.
OK, did the job. Timber was very wet, so gave the impression was going to fit together with no gaps between the boards. Not the case once tried. definitely pay for the convenience of it all
Could do with better instructions, not enough support underfloor
Very disappointed with the quality of bearers and boards large knots that went straight through had to put nail plates on bearers to strengthen. Also covered floor with ply to strengthen. To top it off the floor was smaller than the shed so had to add more timber in one end so that shed could be secured we thought it would be easy and convenient but cost us a lot more money in the end.
Bearers would be better as one piece. Corner floor slabs should not be nailed down hard as corner brackets of shed need to fit under these. Otherwise OK and instructions clear. Laid floor on three concrete slabs.
Great product
Highly recommended
Instructions a little difficult to follow - we made a couple of mistakes initially. We also bought additional lengths of timber for support, as didn't think there was enough, especially thougth it should have support timber underneather the join in the middle.