Garden Shed Wooden Floor Kit 1.55m x 3.07m

Just OK. The instructions are vague, and don't mention the internal dimensions of the shed which are critical. The piece of wood are inconsistent in length, so this is an issue leaving you to guess and hope for the best. Then you need a skill saw to cut down two of the floor boards because they are too big. The instructions also do not mention where the shed corner brackets need to go. So after you have built the floor and have made a start on the shed, you need to cut out 4 corner nails from the floor kit to allow for the corner brackets to slide underneath the floorboards. So much time wasted with crap instructions. You would be better off building the shed first, taking your own internal measurements, and then building your own floor from scratch.

Hi, the floor is a bit rough but it is what it says it is..a shed floor! Overall I'm quite happy about it.

I ordered a Trade Tested Shed and thought a floor would add the finishing touch. all parts were there and very simple to install. Finishes off the shed nicely

The floorboards are rough sawn and a bit of a lottery as to quality. The bearers are ok. You are probably better off procuring these somewhere else where you can see what you are getting plus having them more precisely cut

A bunch of timber that is all the correct length and widths and fits the garden shed!!

Works but not as,strong as thought I added to it and made it properly framed

Easy to put together, simple & great base for a shed.

Felt a bit lazy buying this but it took no time to put together and fitted the shed I bought nicely

A nice base for the cheap sheds here, not sure if all the wood is the same, but mine came with very very wet wood. Would have been nearly freshly off the mill. They do shrink a considerable amount, making the base slightly under size, and small gaps should be planned for in the floorboards when the lot dry out.

No problems was placed on concrete