☆ Note on accessory compatibility: This blind is compatible with existing Louvre Roof Systems on all 3m & 6m sides without a crank handle, please check the handle position on your louvre before purchasing. This blind replaces the corner brackets during installation. See images above for more details.
☆ Note on accessory compatibility: This blind is compatible with existing Louvre Roof Systems on all 3m & 6m sides without a crank handle, please check the handle position on your louvre before purchasing. This blind replaces the corner brackets during installation. See images above for more details.
Complete your outdoor living room with this sleek 2.7m mesh roller blind for 3m & 6m sides on our Louvre Roof Systems.
Designed for all Trade Tested 3x3m, 3x4m, 6x3m and 6x4m louvre roofs, this single blind fits all 3m long sides (post to post measurement 2.7m) or use two to fill a 6m side, which consists of 2 x 3m sides.
The blinds use a UV stabilised open weave mesh that adds shade and privacy without creating a stuffy, enclosed space. Perfect for Kiwi summers.
It's easy to install, with all brackets included for a seamless finish and guide wires to keep things taut & rattle-free.
The manual crank roller cassette features the same all-aluminium construction as the roof, while the PVC/poly blend blind is designed to handle life outside in New Zealand - all backed by a 2 Year Warranty.
Compatible with existing Trade Tested Louvre Roof Systems on all sides without a crank handle, just note the louvre roof corner bracket must be removed for installation. Not compatible with the sides of wall mounted models due to the 3° fall. See images above for more details.
These integrated mesh blinds are a great addition if you want to get the most out of your louvre roof system.
FEATURES
• 2.7m roller cassette mesh blinds to fit 3m louvre sides.
• All aluminium construction
• Add shade & privacy
• UV stabilised PVC/poly open weave mesh blinds
• Manual crank
• Black PVC coated steel guide wires
• 2 Year Warranty
SPECIFICATIONS
Material: Aluminium - roller, cassette, lower beam. Fabric - 30% polyester, 70% PVC
Frame colour: Charcoal
Screen colour: Charcoal
Dimensions: L 270cm x W 16cm x H 11cm (217.5cm blind)
Carton dimensions: 278cm x 18cm x 13cm
Weight Net/Gross: 11kg/14kg
Our friendly and knowledgeable gurus are trained to answer all your questions as quickly as possible. So if there’s anything you need to know just give us a call during business hours, or send us an email any time.
Easy to install and does the job looks sharp!
Shared from: Louvre Roof System Mesh Blind 3.7m Charcoal
Great product and easy to install. Does the job it was designed for, blocks the harsh sunlight, and if the wind gets up you just wind it back up,
Great product, easy to install, would be good if it came with a hook to anchor it down once its fully unrolled.
We are so stoked with our mesh blind which finishes off our wall mounted louvered pergola so nicely. It gives us privacy and shades from the sun and wind. Highly recommend this as an add on.
Shared from: Louvre Roof System Mesh Blind 3.7m Charcoal
We ordered one blind with the Pergola and this was fitted at the time the pergola was built and works just fine.No problems with installing it. So pleased with the blind that we are just ordering two more to create protection from inclement weather.
Well worth the money .the blind has turned our covered patio area into a shady entertainment venue easy to install we fitted a hook to each leg 250mm up from bottom clipping the guide wire to this stops the blind moving in the breeze.
Shared from: Louvre Roof System Mesh Blind 3.7m White
Does exactly what I expected
Shared from: Louvre Roof System Mesh Blind 2.7m White
Was easy to install and works great. Will buy another one ready for spring
Great service re delivery , packaging, and also the installation info. Very happy
Shared from: Louvre Roof System Mesh Blind 3.7m Charcoal
this blind is great except for the track system which is a wire and the fixing clamp at the bottom is not able to hold the wire tight as the screw threads are ill fitting .I believe a track system would work better with a u shaped extrusion running the full length of the uprights.